|
|
|
|
1) Note: Lead wire seperation
T-6mm wire terminal neon lamps are normally made with 3mm lead
wire seperation.
T-4mm wire terminal neon lamps are
normally made with 2mm lead wire seperation.
|
|
|
. |
. |
Tol. |
A |
Lamp Diameter |
3 |
6,4 |
0,2 |
B |
Electrode Length |
3 |
9,5 |
0,5 |
C |
Lead wire Length |
4 |
... |
1,5 |
D |
Lamp Length |
10 |
25 |
1,3 |
E |
Lead wire to Resistor |
4 |
... |
1,5 |
F |
Resistor Lead Length |
4 |
... |
1,5 |
G |
Overall Length to Lead |
15 |
... |
1,5 |
R |
Resistor Length (1/4w) |
3,5 |
6,5 |
0,5 |
|
|
2) Neon lamps + resistors
- Assemblies incorporating a wire terminal of neon or fluorescent
lamp with series resistor, if required, Extended single conductor lead wires
can be produced with butt welded, crimped or tin soldered joints.
- Lead wire may be tin or silver plated on request.
- Dimensions C and G are specified to suit for the particular application by
customer.
|
|
3) Neon lamps+Resistors+Wires:
- This type of joint can also be used to connect more than 2 leads together.
- Assemblies with crimped joints can be supplied with lead lengths C and G
as customers specifications. Dimensions (E) and (H) are 4mm min required.
|
|